Circular Saw

How To Choose Your First Table Saw


Reviews are great at assisting you in picking out which table saw you ought to purchase. The challenge, however, is most reviews assume you have a little understanding about table saws which you might not have. That’s the reason, I’ve written this informative article as a form to help you choose the right table saw.


The fence is the sliding part of the table saw. The fence is used when you feed the wood onto the saw. The quality of the fence will factor in on the final cost of the table saw. The higher quality of the fence that comes with the saw, the higher the price. Most contractor saws have average quality fences, but not all. For normal applications, an average quality fence will be more than enough for most applications and certainly good enough for the occasional user. Average quality fences are okay for beginners and weekend handy men but will lack the quality that a cabinet maker needs.


Some table saws tilt for precision cutting. Table saws tilt right or left. Back in the day, table saws only came with a right tilt except for some professional cabinet models. These days, you can get right or left tilting table saws. Right tilts are easier cutting precision angles and preferred by many. Right tilt saws are the most popular and come with more accessories than left tilt table saws.

Miter gauge

Table saws come with something called miter gauges. There are two slots that are machined into the cast iron tabletop where the miter gauge is inserted. This is where you guide the wood. Just as with the tabletop, the miter gauge that comes with the saw is of average quality. You can buy better miter gauges than what comes with the table saw. Try inserting the miter gauge into the slots and check to see how snug they fit. Do not choose one with a loose fit. You want one that fits snug. Click here.

Size Matters

The most common table saw motor is either a 1 1/2 or 2 horsepower motor in the contractor’s models. The professional cabinet saws use a 3 to 5 horse powered motor. For most applications, the 1 1/2 or 2 horsepower motor on the contractor saw has enough power for any cutting application. Just remember to take it slow and easy and let the saw blade do the cutting.

Saw blade

10 inch blade models are the most popular. However, many of the most expensive cabinet saws have a 12-inch blade. The type of blade is more important than the size. Table saw blades come in a variety shape and types. Combination blades are the most popular and the ones you should use until you become more experienced in the operation of the table saw with different types of wood and cuts. It’s very important that you keep your blades clean and replace them when they get dull.


The tabletop is the most part of the saw. You’ll find a wide difference of quality among tabletops. Don’t scrimp on the table top; it pays to buy a high quality tabletop. Make sure the tabletop is as flat as possible if you want the trouble free operation. Not all tabletops are flat and the ones that don’t make it difficult to make precision cuts. You can reduce your chances of future problems by going with a tabletop from a reputable table saw manufacturer.


With these table saw tips, you should be more than able to choose the correct table saw for nearly any application you can think of. Just be sure to study the owner’s manual and any related documentation that comes with your new table saw. The manufacturers don’t put those documents in there just to have something to do! To find out more, check out


Continue Reading
Choosing a Cordless Circular Saw

Miter Saw Kickback

Even the best miter saws can have a few problems associated with them.

Any time you are working with a saw that uses a radial arm or a saw that utilizes a sliding blade you should be extremely careful.

If the rotating blade of the miter saw best grabs on to whatever wood or material it is cutting, the force of the blade can make it seem as though the saw is coming right for you.

While that is scary enough, this situation can quickly become very dangerous. The kickback from the miter saw can drag your fingers into the blade which would obviously result in severe injury.

Even more worrisome is that the force from the blade kicking back can throw the material that it is cutting. Hopefully it is just thrown across the room, giving you a scare. Sometimes it will be thrown at you, hitting you somewhere on your body. This can hurt very badly since the saw harnesses an amazing amount of power and force to cut.

Worse still, the kickback force can throw the material so hard into you that it can impale your body. This not only causes extreme pain and injury but can even prove fatal.

To keep yourself safe, you need to do all you can to prevent this from happening. Follow a few simple safety precautions and always be very mindful of what is going on…

  • Keep your hands away from the saw blade
  • Wear safety goggles and other equipment to protect yourself
  • Make sure the blade and angles are locked in properly and always double check before powering up
  • Tightly press the material against the fence of the saw
  • Never try to cut wet wood

Always ensure your blade is sharp – never use a dull blade

If you want to know more check out

Continue Reading
Circular Saw
Circular Saw

How To Make Sure You Buy The Best Circular Saw


Throwing away hard earned money is very painful, but most customers make purchases of the circular saw with large amount without carrying out any research on the product they are buying.

What to consider when buying a circular saw

Once your intent to not just get a circular saw but you aim at buying the best circular saw then their question that you must ask yourself which includes: what is the weight of the saw? Is the saw safe or it is the type of saw that kicks like a bucking bronco? What is the durability level and how tough it is? Can stand the rigors of the task it will be used for? Which type of saw will best suit my needs? What the Amp and RPM it is equipped with? Is it easy to use?

How is the weight of the saw distributed and is it properly balanced? How large is the cutting capacity? What are the degrees of the positive stops? Is it powered by electricity or a rechargeable battery and which is more efficient? How durable is the cord connection? How enhanced (or not) is the line of cut? I have large hands, and I like to wear gloves, what is the clearance between the handle and the blade case?

How clear are the depth and bevel markings? How durable and reinforced is the footplate? What is the difference between a “worm drive” circular saw and a “sidewinder”? What are the advantages and disadvantages of each? I rip rafters all day long, is there a hook to rest the saw while I move or pivot?

All of these questions are very important when you decide to purchase one of the best circular saws. During my 27 years as a professional carpenter, my 1stpriority has always been safety. I still have both of my hands and all of my fingers to prove just that. Unfortunately, not all carpenters can say that, and I have witnessed some real gnarly accidents. That being said, all of the above questions play a role in the effectiveness, efficiency, and safety of the saw and it’s imperative that you purchase a saw that is right (not only) for you, but for the job/s, you intend to use it.

With all of the different makes and models, it can become a little overwhelming and laborious selecting the best circular saw. Over the years that I’ve been involved in carpentry, I’ve purchased many tools, and during that time there were no websites to assist me in making an informed purchase decision.


Most often than not consumer rely on words of mouth to purchase circular saw from friends, family or co-workers, but I can assure you that with just a little more effort you can make that you purchase the best circular saw at the best price, as you know getting the best circular saw for the best price is an effort that is worth it. Visit:

Continue Reading
Power Tool Buying Guide For Circular Saw
Circular Saw

Power Tool Buying Guide For Circular Saw

What to search for when purchasing the best circular saw

I would search for a circular saw that acknowledges 7 1/4 edges. These are the most widely recognized cutting edges; in this manner making it less demanding to purchase sharp edges not far off. Likewise I would search for a saw with a long string, as you would be amazed what number of lines are short. You can simply include an additional line, yet I would search for a line that is no less than 8 feet long. Another essential thing to search for is a movable base plate. This is useful for making edge cuts and in some cases comes in extremely convenient. click here for more info.

Corded Saws – Corded saws are all the more effective, yet additionally heavier. On the off chance that you will be cutting a considerable measure of wood, get the corded model as it will spare you disturbance not far off.

Cordless Saws – Cordless saws are pleasant in light of the fact that they have no strings to connect to, stumble over or even slice through. Be that as it may, they need control. The cutting edges have a tendency to be littler and in this manner they don’t cut as brisk. Since it takes a considerable measure of energy to slice through wood, you will require more than one battery as you will be reviving them regularly.

In-Line Saw – These are the most well-known sorts of the best circular saws and have a tendency to be the slightest costly. What’s more, they don’t weigh as much as the Worm Drive saws. An In-line saw’s engine sits opposite to the edge and a pole runs specifically from the engine to drive the cutting edge.

Power Tool Buying Guide For Circular Saw

Worm Drive Saw – A worm drive saw is for overwhelming obligation utilize and tends to cost somewhat more than the In-Line saws. A worm drive engine is situated parallel with the sharp edge and uses a rigging to expand the torque exchanged to the edge. These have a tendency to be somewhat heavier than the in-line models. for more details, visit :

Round Saw Features

Electric Brakes – This is one component I would get, no inquiries inquired. An electric brake stops the engine in around two seconds subsequent to discharging the trigger, while the saw that having no electric brake may take in just around ten to fifteen seconds to stop. The electric brake works by turning around the stream of power to the saw engine.

Sharp edge Capacity – As noted above best circular saws come in various cutting edge sizes. On the off chance that you are purchasing a corded model I would run with a 7 1/4″ and for cordless, run with a 6 1/2″. The bigger cutting edge models are heavier, yet over the long haul you should make less cuts, particularly on point cuts.

Shaft Locks – Make beyond any doubt your saw has a bolt. A Shaft bolt is normally a catch you squeeze that keeps the edge as yet, making changing the edge less demanding. On the off chance that you’re purchasing an expert power roundabout saw, it ought to have this element. The less expensive models more often than not don’t have this feature.

Continue Reading
Circular Saws Guide for New Woodworkers

Circular Saws Guide for New Woodworkers

The Indirect Circular Saw:

These come as Worm-Drive and Hypoid saws. Don’t let the “indirect” descriptor here be misleading… these are powerful saws. “Worm” and “Hypoid” are just the terms used to describe the gears used in these. This is a specialized circular saw for heavy-duty cutting. It’s generally used in framing, roofing, and other carpentry. Usually, these saws are heavier, larger, and provide more torque to help cut through denser woods and handle the tough demands of a work site.

The Direct Drive Circular Saw:

This is a more compact best circular saw than the typical worm-drive saw. As the name suggests, the cutting blade is directly attached to the motor. These can be very powerful, but this is also the type of design used in some under powered and cheaply manufactured saws. click here for related details.

Circular Saw Features to Know About:

– Weight:

There’s so much variety in circular saw designs and engineering that no category of hand-held circular saw can claim to be the heaviest or lightest. While generally speaking, direct drive circular saws are lighter than hypoid and worm drive saws, there are certainly direct-drive saws that are heavier. Most budget saws will use a somewhat heavier formed steel base plate/shoe and blade guards. Lighter saws use cast aluminum or magnesium alloys for their base plate and blade guards. for further info, click on :

Circular Saws Guide for New Woodworkers

– Power & Amps:

Most circular saws will advertise their power in amps. The most common rating is 15 amps. Some are rated at 14, amps, 13 amps, 12, amps, 10 amps, and lower. However, more isn’t always better. The amount of power the motor of the saw uses doesn’t always translate to more power at the actual cutting blade. The design of the motor’s inner-workings plays a role.

– Oh, and what about cordless circular saws?

The size and power of the battery is the thing to consider for these. You’ll see these rated in volts, with 18-volt and 20-volt saws (saws designed to work with 20-volt batteries) being very common in budget and mid-level saws. The volt rating is something that can be used as part of comparing different saws, but shouldn’t be the only aspect considered.

– Depth and Cutting Angle Adjustment:

Some saws can cut thicker materials than others. Also, some can cut at greater angles than others. Among best circular saws that use the most common sized blades (7 1/4″), the depth of cut limit doesn’t vary greatly. However, even an additional 1/8″ cutting depth can make a big difference in some applications.

– Motor Brake:

This is exactly what it sounds like. Once you release the power trigger, a brake engages that stops the motor from turning in about 2 seconds. It increases the safety of a saw, though all circular saws have a lower guard that also helps protect a person and work surfaces from the spinning blade when the saw is not actually being used to make cuts.

– Anti-Snag Lower Blade Guard:

All common hand-held circular saws will have a lower blade guard that moves during cuts, but some may snag on the edge of materials being cut. An anti-snag lower guard is becoming the standard, but some saws may still have trouble with snagging during beveled cuts. A lower guard that snags on the edge of a board can be dangerous.

Continue Reading
Choosing a Cordless Circular Saw

Choosing a Cordless Circular Saw

Best circular saws are excellent for rip cuts, cutting with the grain, and also for cross cuts, or cuts made against the grain. The saw is also surprisingly accurate—even without a guide. Because the blade is so large, its bigger size generally keeps your cuts on track. Where accuracy is key, however, a fence or guide can be attached to ensure optimized cutting precision. There is a wide range of circular saws available from 4in. to 7-1/4in. (7-1/4in., for example, refers to the blade’s diameter), and hand-held to table mounted. Craftsmen, however, cannot get too far without needing a lightweight and cordless circular saw to get the job done.

These cordless in circular saw is a lightweight and also a convenient eliminating to the importance of outlets as well as to lugging around endlessly, knotted ropes of power cord. With its portability and more compact size, the cordless saw can go more places and conveniently conquer your projects with not much sacrifice to power. From commercial jobs to backyard plans, no toolbox should be without this cordless giant. click here for more details.

The said saw was a powerful, versatile and powerful tool designed to cut wood with a large spinning blade and also in your shed plans. While most circular saws are specifically designed to cut wooden materials, most can also be used with specialty blades made to cut metals, plastics, and other industrial materials. Circular saws have a flat, pivoting shoe that moves up and down for depth adjustment, and to the right or left (although generally to the left, from zero to 45 or 50 degrees) for angled cuts or edging. Circular saws are also built with a blade guard which covers the blade almost entirely to protect operators from the jaws of a spinning blade. for more details, visit :

Choosing a Cordless Circular Saw

Milwaukee is also well known for their advanced and unrivaled battery power. The 2630-22 circular saw utilizes Milwaukee’s long lasting 2.8 amh (amp hours) lithium-ion batteries. These high-capacity batteries last longer to increase your productivity and produce 20% more torque to deliver the most powerful cuts. The saw also features an electronic overload system, a mechanism designed to protect the saw from burning up. Keeping the tool’s motor safe from overuse, the overload system extends the overall life and productivity of the saw. Additionally, the tool features an electronic braking system that stops the blade quickly to reinforce safety on the job. Milwaukee’s circular saw is ideal for any serious woodworker—contractors and at-home hobbyists alike.

Makita’s best circular saw utilizes lithium ion technology to provide longer battery run-time and an optimized overall lifespan. Makita also provides an advanced charging system (45-minute optimum charger) that, through built-in CPU chips, communicates with the battery to maximize performance. Throughout the charging process the charger monitors, with “Active 3 Control” technology, the current, temperature, and voltage within the battery. The 45-minute optimum charger also has a built-in fan to cool the battery and deliver optimal performance for the life of the battery.

These options provide a pretty good review of what’s available for cordless circular saws. The portability and power of the tool coupled with its lightweight, compact, comfortable, and cordless design, establish the cordless circular saw as a must-have in any craftsman’s toolbox. For rip cuts, cross cuts, beveled or angled cuts, and its fast accuracy, the circular saw is the ultimate cutting tool.

Continue Reading