Choosing a Cordless Circular Saw

Miter Saw Kickback

Even the best miter saws can have a few problems associated with them.

Any time you are working with a saw that uses a radial arm or a saw that utilizes a sliding blade you should be extremely careful.

If the rotating blade of the miter saw best grabs on to whatever wood or material it is cutting, the force of the blade can make it seem as though the saw is coming right for you.

While that is scary enough, this situation can quickly become very dangerous. The kickback from the miter saw can drag your fingers into the blade which would obviously result in severe injury.

Even more worrisome is that the force from the blade kicking back can throw the material that it is cutting. Hopefully it is just thrown across the room, giving you a scare. Sometimes it will be thrown at you, hitting you somewhere on your body. This can hurt very badly since the saw harnesses an amazing amount of power and force to cut.

Worse still, the kickback force can throw the material so hard into you that it can impale your body. This not only causes extreme pain and injury but can even prove fatal.

To keep yourself safe, you need to do all you can to prevent this from happening. Follow a few simple safety precautions and always be very mindful of what is going on…

  • Keep your hands away from the saw blade
  • Wear safety goggles and other equipment to protect yourself
  • Make sure the blade and angles are locked in properly and always double check before powering up
  • Tightly press the material against the fence of the saw
  • Never try to cut wet wood

Always ensure your blade is sharp – never use a dull blade

Continue Reading
Circular Saws Guide for New Woodworkers

Circular Saws Guide for New Woodworkers

The Indirect Circular Saw:

These come as Worm-Drive and Hypoid saws. Don’t let the “indirect” descriptor here be misleading… these are powerful saws. “Worm” and “Hypoid” are just the terms used to describe the gears used in these. This is a specialized circular saw for heavy-duty cutting. It’s generally used in framing, roofing, and other carpentry. Usually, these saws are heavier, larger, and provide more torque to help cut through denser woods and handle the tough demands of a work site.

The Direct Drive Circular Saw:

This is a more compact best circular saw than the typical worm-drive saw. As the name suggests, the cutting blade is directly attached to the motor. These can be very powerful, but this is also the type of design used in some under powered and cheaply manufactured saws. click here for related details.

Circular Saw Features to Know About:

– Weight:

There’s so much variety in circular saw designs and engineering that no category of hand-held circular saw can claim to be the heaviest or lightest. While generally speaking, direct drive circular saws are lighter than hypoid and worm drive saws, there are certainly direct-drive saws that are heavier. Most budget saws will use a somewhat heavier formed steel base plate/shoe and blade guards. Lighter saws use cast aluminum or magnesium alloys for their base plate and blade guards. for further info, click on :

Circular Saws Guide for New Woodworkers

– Power & Amps:

Most circular saws will advertise their power in amps. The most common rating is 15 amps. Some are rated at 14, amps, 13 amps, 12, amps, 10 amps, and lower. However, more isn’t always better. The amount of power the motor of the saw uses doesn’t always translate to more power at the actual cutting blade. The design of the motor’s inner-workings plays a role.

– Oh, and what about cordless circular saws?

The size and power of the battery is the thing to consider for these. You’ll see these rated in volts, with 18-volt and 20-volt saws (saws designed to work with 20-volt batteries) being very common in budget and mid-level saws. The volt rating is something that can be used as part of comparing different saws, but shouldn’t be the only aspect considered.

– Depth and Cutting Angle Adjustment:

Some saws can cut thicker materials than others. Also, some can cut at greater angles than others. Among best circular saws that use the most common sized blades (7 1/4″), the depth of cut limit doesn’t vary greatly. However, even an additional 1/8″ cutting depth can make a big difference in some applications.

– Motor Brake:

This is exactly what it sounds like. Once you release the power trigger, a brake engages that stops the motor from turning in about 2 seconds. It increases the safety of a saw, though all circular saws have a lower guard that also helps protect a person and work surfaces from the spinning blade when the saw is not actually being used to make cuts.

– Anti-Snag Lower Blade Guard:

All common hand-held circular saws will have a lower blade guard that moves during cuts, but some may snag on the edge of materials being cut. An anti-snag lower guard is becoming the standard, but some saws may still have trouble with snagging during beveled cuts. A lower guard that snags on the edge of a board can be dangerous.

Continue Reading
Choosing a Cordless Circular Saw

Choosing a Cordless Circular Saw

Best circular saws are excellent for rip cuts, cutting with the grain, and also for cross cuts, or cuts made against the grain. The saw is also surprisingly accurate—even without a guide. Because the blade is so large, its bigger size generally keeps your cuts on track. Where accuracy is key, however, a fence or guide can be attached to ensure optimized cutting precision. There is a wide range of circular saws available from 4in. to 7-1/4in. (7-1/4in., for example, refers to the blade’s diameter), and hand-held to table mounted. Craftsmen, however, cannot get too far without needing a lightweight and cordless circular saw to get the job done.

These cordless in circular saw is a lightweight and also a convenient eliminating to the importance of outlets as well as to lugging around endlessly, knotted ropes of power cord. With its portability and more compact size, the cordless saw can go more places and conveniently conquer your projects with not much sacrifice to power. From commercial jobs to backyard plans, no toolbox should be without this cordless giant. click here for more details.

The said saw was a powerful, versatile and powerful tool designed to cut wood with a large spinning blade and also in your shed plans. While most circular saws are specifically designed to cut wooden materials, most can also be used with specialty blades made to cut metals, plastics, and other industrial materials. Circular saws have a flat, pivoting shoe that moves up and down for depth adjustment, and to the right or left (although generally to the left, from zero to 45 or 50 degrees) for angled cuts or edging. Circular saws are also built with a blade guard which covers the blade almost entirely to protect operators from the jaws of a spinning blade. for more details, visit :

Choosing a Cordless Circular Saw

Milwaukee is also well known for their advanced and unrivaled battery power. The 2630-22 circular saw utilizes Milwaukee’s long lasting 2.8 amh (amp hours) lithium-ion batteries. These high-capacity batteries last longer to increase your productivity and produce 20% more torque to deliver the most powerful cuts. The saw also features an electronic overload system, a mechanism designed to protect the saw from burning up. Keeping the tool’s motor safe from overuse, the overload system extends the overall life and productivity of the saw. Additionally, the tool features an electronic braking system that stops the blade quickly to reinforce safety on the job. Milwaukee’s circular saw is ideal for any serious woodworker—contractors and at-home hobbyists alike.

Makita’s best circular saw utilizes lithium ion technology to provide longer battery run-time and an optimized overall lifespan. Makita also provides an advanced charging system (45-minute optimum charger) that, through built-in CPU chips, communicates with the battery to maximize performance. Throughout the charging process the charger monitors, with “Active 3 Control” technology, the current, temperature, and voltage within the battery. The 45-minute optimum charger also has a built-in fan to cool the battery and deliver optimal performance for the life of the battery.

These options provide a pretty good review of what’s available for cordless circular saws. The portability and power of the tool coupled with its lightweight, compact, comfortable, and cordless design, establish the cordless circular saw as a must-have in any craftsman’s toolbox. For rip cuts, cross cuts, beveled or angled cuts, and its fast accuracy, the circular saw is the ultimate cutting tool.

Continue Reading